Direkt zum Hauptbereich

Open DRM-Free Unencrypted DVB-T2 Tv and Radio in Austria

Most things in Austria terestical TV got encrypted since DVB-T got shut down, but there are still three TV channels and three Radio Channels unencrypted. I had some hard time to find out how to get it working using linux... and non existing documentation of the sender did not help. Howerver... if you have use for detailed channel setup arround vienna, take a look:

Tvheadend seems to lack channel search support using DVB-T2, but puzzeling every value together works fine:

Mux A-WNB


Channel Frequency: 498000000

Bandwitdh: 8MHz

Constellation; QAM/16

Mux B2

Channel Frequency: 578000000

Bandwitdh: 8MHz

Constellation; QAM/16

Unstable Twin Tuner

I am using some twin tuner. That was not supported on older kernel version, but is now supported on current versions. Great? nope. The system/tvheadend gets unstable if two tuner are enabled running for weeks. After disabling one tuner, tvheadend runs reliable for months.

List of unencrypted streams

Example stream info tv channel

 

Surround sound

Too bad. While movies where sent with AC-3 5.1 when DVB-T was avaliabel in Austria, there is no unecrypted movie with 5.1 anymore. The only thing that is sent with 5.1. is the radio channel Ö1:

Sources

I cant remember where I got values for bandwith and constellation, but frequency can be looked up at ORS.

Channel frequencies https://www.ors.at/de/gateways/antenne/frequenzlisten/

Encryption state of channels MUX A und B (bundesweites DVB-T2) | RTR

Kommentare

Beliebte Posts aus diesem Blog

Cleanup your windows machine

still working: Use these lines to get your windows system cleaned up a bit and free your disk from old temporary and backup files: RD %temp%\ /S /Q rd /s /q C:\Windows\ServiceProfiles\NetworkService\AppData\Local\VSEQT\QTController rd %windir%\temp\ /s /q rd C:\TEMP\ /s /q rd C:\Quarantine /s /q rd "%userprofile%\AppData\Local\Temp\"  /s /q del C:\Windows\Installer\.tmp RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v1.0.3705\Temporary ASP.NET Files\" RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v1.1.4322\Temporary ASP.NET Files\" RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\" RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v3.0\Temporary ASP.NET Files\" RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v3.5\Temporary ASP.NET Files\" RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\" RD /S /Q "%userprofile%\AppData\Local\Microso

pdf to dxf

if you get a cad plan in pdf format you have a problem: Pdf can not be loaded in most cad programs. I used pstoedit to solve this problem. Pstoedit is a free tool to convert pdfs to dxf. What you have to do: Install pstoedit Install ghostscript shot at your pdfs: pstoedit.exe <pdfSource> <dxfOutput> -f dxf thanks to the author of pstoedit! Here is the pstoedit.exe -help output: No output format specified (-f option) and format could not be uniquely deduced from suffix .dxf of output file Available formats :     psf:            .fps:    Flattened PostScript (no curves)     (built-in) -------------------------------------------     ps:            .spsc:    Simplified PostScript with curves     (built-in) -------------------------------------------     debug: