Send to sleep and wake up - Tvheadend / Kodi Setup

Shutdown and timed startup automation saves your setup from running 24/7.

Configure Kodi

setwakeup.sh

#!/bin/sh
#$1 is the first argument to the script. It is the time in seconds since 1970
#this is defined in mythtv-setup with the time_t argument

#this clears your alarm.
echo 0 > /sys/class/rtc/rtc0/wakealarm      
#this writes your alarm
echo $1 > /sys/class/rtc/rtc0/wakealarm     

set script to be executable

sudo chmod +x /usr/bin/setwakeup.sh

Reference

https://forum.kodi.tv/showthread.php?tid=155128

Kommentare

Beliebte Posts aus diesem Blog

Open DRM-Free Unencrypted DVB-T2 Tv and Radio in Austria

Most things in Austria terestical TV got encrypted since DVB-T got shut down, but there are still three TV channels and three Radio Channels unencrypted. I had some hard time to find out how to get it working using linux... and non existing documentation of the sender did not help. Howerver... if you have use for detailed channel setup arround vienna, take a look: Tvheadend seems to lack channel search support using DVB-T2, but puzzeling every value together works fine: Mux A-WNB Channel Frequency: 498000000 Bandwitdh: 8MHz Constellation; QAM/16 Mux B2 Channel Frequency: 578000000 Bandwitdh: 8MHz Constellation; QAM/16 Unstable Twin Tuner I am using some twin tuner. That was not supported on older kernel version, but is now supported on current versions. Great? nope. The system/tvheadend gets unstable if two tuner are enabled running for weeks. After disabling one tuner, tvheadend runs reliable for months. List of unencrypted streams Example stream info tv channel Surround sound ...

Cleanup your windows machine

still working: Use these lines to get your windows system cleaned up a bit and free your disk from old temporary and backup files: RD %temp%\ /S /Q rd /s /q C:\Windows\ServiceProfiles\NetworkService\AppData\Local\VSEQT\QTController rd %windir%\temp\ /s /q rd C:\TEMP\ /s /q rd C:\Quarantine /s /q rd "%userprofile%\AppData\Local\Temp\" /s /q del C:\Windows\Installer\.tmp RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v1.0.3705\Temporary ASP.NET Files\" RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v1.1.4322\Temporary ASP.NET Files\" RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\" RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v3.0\Temporary ASP.NET Files\" RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v3.5\Temporary ASP.NET Files\" RD /S /Q "%SystemRoot%\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\" RD /S /Q "%userprofile%\AppData\Local\Microso...

pdf to dxf

if you get a cad plan in pdf format you have a problem: Pdf can not be loaded in most cad programs. I used pstoedit to solve this problem. Pstoedit is a free tool to convert pdfs to dxf. What you have to do: Install pstoedit Install ghostscript shot at your pdfs: pstoedit.exe <pdfSource> <dxfOutput> -f dxf thanks to the author of pstoedit! Here is the pstoedit.exe -help output: No output format specified (-f option) and format could not be uniquely deduced from suffix .dxf of output file Available formats : psf: .fps: Flattened PostScript (no curves) (built-in) ------------------------------------------- ps: .spsc: Simplified PostScript with curves (built-in) ------------------------------------------- debug: ...

nerdstuff

Dieses Blog durchsuchen